|
|
The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 11 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
| Specifications: |
|
|
| Dimensions | | 9.3 high;
18.2 long;
12.0 wide; cms [3-5/8] high;
[7-1/8] long;
[4-3/4] wide; inches
|
|
| Pump | | Bronze
|
|
| Impeller | | Jabsco Neoprene compound
|
|
| Seal | | Lip Type
|
|
| Weight | | 6 lb 2.7 kg
|
|
| Port(s) | | 1/2" Internal Pipe Threads
1" External Hose Barb
|
|
| Motor | | Equipped with Run-Dry Protection Device
(Patent Pending)
12 Volt DC
Permanent Magnet Type
Fully Enclosed
Stainless Steel Shaft
Ball Type Shaft Bearing
Reversible
|
|
| Rating | | CE;
Motors meet USCG Electrical Regulation
183.410 and ISO 8846 MARINE for IGNITION
PROTECTION on gasoline powered vessels.;
|
|
